UN-5700 Line Size 5

Studs

Flush Head, Straight Slot
 Part Number: 5765-20-G-Z2CT

Slotted Flush Head Threaded Stud Picture

Slotted Flush Head Threaded Stud Dimension Drawing
Oval Head, Straight Slot
Part Number: 5715-20-G-Z2CT

Slotted Oval Head Threaded Stud Picture

Slotted Oval Head Threaded Stud Dimension Drawing
Hex Head
Part Number: 5785-20-G-Z2CT

Hex Head Threaded Stud Picture

Hex Head Threaded Stud Dimension Drawing

Mechanical Properties
Thread Major Diameter: .313"
Rated Tensile and Shear: 1500 lb
Locking Torque Retention: 5000 cycles
Locking Torque: 15-25 in-lb (Initially higher on first use.)

Standard Material:Steel, heat treated.

Finish:
Zinc Trivalent Clear .0002 thick. Trivalent Chromate Clear with Sealer (RoHS Compliant)
Specification(s): ASTM-B-633, Type III, SC 1, Clear
Suffix: -Z2CT

The above mentioned finish will be supplied as the standard finish upon depletion of existing stock which are finished as follows: Cadmium Electroplated .0002 thick, Clear Chromate (Obsolete)
Specification(s): QQ-P-416, TYPE I, CLASS 3, CLEAR
Suffix: -C2C

English

Total Material
Thickness 		G Stud Shank Dimensions Stud Weights (lb Each)
G Dim. U Dim. Flush
5765-20-
xxx-Z2CT 		Oval
5715-20-
xxx-Z2CT 		Hex
5785-20-
xxx-Z2CT
.000" to .100" 10 .700" .360" .01311 .01335 .02555
.101" to .200" 20 .800" .460" .01443 .01467 .02687
.201" to .300" 30 .900" .560" .01575 .01599 .02819
.301" to .400" 40 1.000" .660" .01707 .01731 .02951
.401" to .500" 50 1.100" .760" .01839 .01863 .03083
.501" to .600" 60 1.200" .860" .01971 .01995 .03215
.601" to .700" 70 1.300" .960" .02103 .02127 .03479
.701" to .800" 80 1.400" 1.060" .02235 .02259 .03611

Note: A thread lubricant suitable for the fastener's installed environment is recommended.

Metric

Total Material
Thickness 		G Stud Shank Dimensions Stud Weights (g. Each)
G Dim.
(mm)		 U Dim.
(mm)		 Flush
5765-20-
xxx-Z2CT 		Oval
5715-20-
xxx-Z2CT 		Hex
5785-20-
xxx-Z2CT
0.00 - 2.54 10 17.78 9.14 5.95 6.06 11.59
2.57 - 5.08 20 20.32 11.68 6.55 6.65 12.19
5.11 - 7.62 30 22.86 14.22 7.14 7.25 12.79
7.65 - 10.16 40 25.40 16.76 7.74 7.85 13.39
10.19 - 12.70 50 27.94 19.30 8.34 8.45 13.98
12.73 - 15.24 60 30.48 21.84 8.94 9.05 14.58
15.27 - 17.78 70 33.02 24.38 9.54 9.65 15.78
17.81 - 20.32 80 35.56 26.92 10.14 10.25 16.38

Note: A thread lubricant suitable for the fastener's installed environment is recommended.