Go Green and Save Green!

When selecting finishes, select the RoHS compliant finishes. They are better for the environment and less expensive!
 

UN-5700 Line Size 4

Studs

Flush Head, Straight Slot
Part Number: 5764-20-G-Z2CT

Slotted Flush Head Threaded Stud Picture

Slotted Flush Head Threaded Stud Dimension Drawing
Oval Head, Straight Slot
Part Number: 5714-20-G-Z2CT

Slotted Oval Head Threaded Stud Picture

Click here for the Engineering Drawing
5714 Revision B

 Slotted Oval Head Threaded Stud Dimension Drawing
Hex Head
Part Number: 5784-20-G-Z2CT

Hex Head Threaded Stud Picture

Click here for the Engineering Drawing
5784 Revision A

 Hex Head Threaded Stud Dimension Drawing

Mechanical Properties:
Thread Major Diameter: .250" (6.35 mm)
Rated Tensile and Shear: 1000 lb
Locking Torque Retention: 5000 cycles
Locking Torque: 8-12 in-lb (Initially higher on first use.)

Standard Material:
Steel, heat treated.

Finish:
Zinc Trivalent Clear .0002 thick. Trivalent Chromate Clear with Sealer (RoHS Compliant)
Specification(s): ASTM-B-633, Type III, SC 1, Clear
Suffix: -Z2CT

The above mentioned finish will be supplied as the standard finish upon depletion of existing stock which are finished as follows: Cadmium Electroplated .0002 thick, Clear Chromate (Obsolete)
Specification(s): QQ-P-416, TYPE I, CLASS 3, CLEAR
Suffix: -C2C

English

Total Material
Thickness
(in)		 G Stud Shank Dimensions Stud Weight (lb Each)
G Dim.
(in)		 U Dim.
(in)		 Flush
5764-20-
xxx-Z2CT		 Oval
5714-20-
xxx-Z2CT		 Hex
5784-20-
xxx-Z2CT
.000 to .100 10 .565 .250 - .00675 .01392
.101 to .200 20 .665 .350 .00751 .00752 .01469
.201 to .300 30 .765 .450 .00828 .00829 .01546
.301 to .400 40 .865 .550 .00906 .00906 .01623
.401 to .500 50 .965 .650 .00983 .00983 .01700
.501 to .600 60 1.065 .750 .01060 .01060 .01777
.601 to .700 70 1.165 .850 .01137 .01137 .01854
.701 to .800 80 1.265 .950 .01214 .01214 .01931

Note: A thread lubricant suitable for the fastener's installed environment is recommended.

FOR PART NUMBER 5764-20-20-Z2CT minimum panel thickness is .150".

Metric

Total Material
Thickness
(mm)		 G Stud Shank Dimensions Stud Weight (g. Each)
G Dim.
(mm)		 U Dim.
(mm)		 Flush
5764-20-
xxx-Z2CT		 Oval
5714-20-
xxx-Z2CT		 Hex
5784-20-
xxx-Z2CT
0.00 - 2.54 10 14.35 6.35 - 3.06 6.31
2.57 - 5.08 20 16.89 8.89 3.41 3.41 6.66
5.11 - 7.62 30 19.43 11.43 3.76 3.76 7.36
7.65 - 10.16 40 21.97 13.97 4.11 4.11 7.36
10.19 - 12.70 50 24.51 16.51 4.46 4.46 7.71
12.73 - 15.24 60 27.05 19.05 4.81 4.81 8.06
15.27 - 17.78 70 29.59 21.59 5.16 5.16 8.41
17.81 - 20.32 80 32.13 24.13 5.51 5.51 8.76

Note: A thread lubricant suitable for the fastener's installed environment is recommended.

FOR PART NUMBER 5764-20-20-Z2CT minimum panel thickness is 3.81 mm.