Go Green and Save Green!

When selecting finishes, select the RoHS compliant finishes. They are better for the environment and less expensive!

 

UN-5700 Line Size 3

Studs

Flush Head, Hex Recess
Part Number: 5763-S20-G-Z2CT

Flush Head Hex Recess Threaded Stud Picture

Click here for the Engineering Drawing
5763-S Revision A

Flush Head Hex Recess Threaded Stud Dimension Drawing
Oval Head, Straight Slot
Part Number: 5713-20-G-Z2CT

Slotted Oval Head Threaded Stud Picture

Click here for the Engineering Drawing
5713 Revision B

Slotted Oval Head Threaded Stud Dimension Drawing
Hex Head
Part Number: 5783-20-G-Z2CT

Hex Head Threaded Stud Picture

Click here for the Engineering Drawing
5783 Revision A

Hex Head Threaded Stud Dimension Drawing

Mechanical Properties:
Thread Major Diameter: .187" (4.78 mm)
Rated Tensile and Shear: 600 lb
Locking Torque Retention: 5000 cycles.
Locking Torque: 4-8 in-lb (Initially higher on first use.)

Standard Materials:
Steel, heat treated.

Finish:
Zinc Trivalent Clear .0002 thick. Trivalent Chromate Clear with Sealer (RoHS Compliant)
Specification(s): ASTM-B-633, Type III, SC 1, Clear
Suffix: -Z2CT

The above mentioned finish will be supplied as the standard finish upon depletion of existing stock which are finished as follows: Cadmium Electroplated .0002 thick, Clear Chromate (Obsolete)
Specification(s): QQ-P-416, TYPE I, CLASS 3, CLEAR
Suffix: -C2C

English

Total Material
Thickness
(in)
G Stud Shank Dimensions Stud Weights (lb Each)
G Dim.
(in)
U Dim.
(in)
Flush
5763-S20-
xxx-Z2CT
Oval
5713-20-
xxx-Z2CT
Hex
5783-20-
xxx-Z2CT
.000 to .050 5 .420 .160 - .00304 .0060
.051 to .100 10 .470 .210 - .00324 .0062
.101 to .150 15 .520 .260 .00308 .00344 .0064
.151 to .200 20 .570 .310 .00328 .00364 .0066
.201 to .250 25 .620 .360 .00348 .00384 .0068
.251 to .300 30 .670 .410 .00368 .00404 .0070
.301 to .350 35 .720 .460 .00388 .00424 .0072
.351 to .400 40 .770 .510 .00408 .00444 .0074

Note: A thread lubricant suitable for the fastener's installed environment is recommended.

FOR PART NUMBER 5763-S20-15-Z2CT, minimum panel thickness is .125".

Metric

Total Material
Thickness
(mm)
G Stud Shank Dimensions Stud Weights (g. Each)
G Dim.
(mm)
U Dim.
(mm)
Flush
5763-S20-
xxx-Z2CT
Oval
5713-20-
xxx-Z2CT
Hex
5783-20-
xxx-Z2CT
0.00 - 1.27 5 10.67 1.06 - 1.38 2.72
1.30 - 2.54 10 11.94 5.33 - 1.47 2.81
2.57 - 3.81 15 13.21 6.60 1.40 1.56 2.90
3.84 - 5.08 20 14.48 7.87 1.49 1.65 2.99
5.11 - 6.35 25 15.75 9.14 1.58 1.74 3.08
6.38 - 7.62 30 17.02 10.41 1.67 1.83 3.18
7.65 - 8.89 35 18.29 10.92 1.76 1.92 3.27
8.92 - 10.16 40 19.56 12.95 1.85 2.01 3.36

Note: A thread lubricant suitable for the fastener's installed environment is recommended.

FOR PART NUMBER 5763-S20-15-Z2CT, minimum panel thickness is 3.18 mm.