TL-7800 Line 7886 Small Toggle Latch - DZUS ® is not affiliated with DFCI ®

Solutions Inc.

CAGE: 72794

DFCI Solutions Inc.

The original manufacturer of the Quarter-Turn fastener.

Our company has not changed ownership and is still a
Veteran Owned - Small Business.

The Customer is Number One!

Go Green and Save Green!

When selecting finishes, select the RoHS compliant finishes. They are better for the environment and less expensive!

TL-7800 Line Toggle Latches - 7886 Series

7886-1-Z3CT
Working Strength: 45 lb	Ultimate Strength: 220 lb
Click here for the Engineering Drawing 7886-1 Revision A

7886-2-Z3CT
Working Strength: 45 lb	Ultimate Strength: 220 lb
Click here for the Engineering Drawing 7886-2 Revision A

7886-7-Z3CT
Working Strength: 45 lb	Ultimate Strength: 220 lb

A strike is not required for the 7886-41-Z3CT and the 7886-42-Z3CT, however, any 7880 or 7882 strike may be used with these latches.

7886-41-Z3CT
Working Strength: 45 lb	Ultimate Strength: 220 lb
Click here for the Engineering Drawing 7886-41 Revision A

7886-42-Z3CT
Working Strength: 45 lb	Ultimate Strength: 220 lb

Dim.	inch	mm
A	.510	12.95
B	.394	10.01
C	.167	4.24
D	.590	14.99
E	1.18	29.97

Dim.	inch	mm
F	.53	13.46
G	1.10	27.94
I	.87	22.10
J	.08	2.03

Dim.	inch	mm
H (7886-1)	1.26	32.00
H (7886-2)	.69	17.53
H (7886-7)	1.26	32.00
H (7886-41)	.85	21.59
H (7886-42)	.98	24.89

Dim.	inch	mm
K (7886-41)	.00 - .20	0.00 - 5.08
K (7886-42)	.16 - .36	4.06 - 9.14

Design Information

Ultimate Strength:	220 lb
Working Strength:	45 lb
Pull-up ability:	.2 in.
Material:	Steel
Finish:	Zinc Trivalent Clear .0003 thick. Trivalent Chromate Clear with Sealer (RoHS Compliant) Specification(s): ASTM-B-633, Type III, SC 2, Clear Suffix: -Z3CT The yellow finish is also available: Zinc Trivalent Yellow .0003 thick, Trivalent Chromate Yellow Dye with Sealer We recommend the Z3CT finish instead of the Z3YT finish. The Z3CT finish is much more cost effective and provides the same salt spray benefits as the Z3YT finish. (RoHS Compliant) Specification(s): ASTM-B-633, Type II, SC 2, Yellow Suffix: -Z3YT Note: The above mentioned finish will be supplied as the standard finish upon depletion of existing stock which are finished as follows: Zinc electroplate .0003 thick, yellow chromate (NOT RoHS Compliant) Specification(s): ASTM-B-633, TYPE II, SC 2 YELLOW Suffix: -Z3Y
Stainless Steel 300 Series:	Change the finish suffix on the part number for "Z3CT" to "SS".

Installation

Mounting holes will accept .156 inch diameter rivets or #6 round head screws.

7886 Sizing Table

Contact Dimension Drawing with Parts Identification

Latch to Link Contact Dimensions (Closed Latch)

Std. Part No.	Stainless Steel Part No.	Strike 7880-C5 Dim. A		Strike 7880-C7 Dim. A		Strike 7880-C9 Dim. A		Strike 7882-C2 Dim. A
Std. Part No.	Stainless Steel Part No.	inch	mm	inch	mm	inch	mm	inch	mm
7886-1-Z3CT	7886-1-SS	1.87	47.50	1.12	28.45	1.04	26.42	1.20	30.48
7886-2-Z3CT	7886-2-SS	1.34	34.04	.59	14.99	.51	12.95	.67	17.02
7886-7-Z3CT	7886-7-SS	1.93	49.02	1.18	29.97	1.10	27.94	1.26	32.00

The following drawings show the measurement points on the strikes for Dim A.

7882-C2	7880-C5	7880-C7	7880-C9

Std. Part No.	Stainless Steel Part No.	No Strike Needed Dim. B
Std. Part No.	Stainless Steel Part No.	inch	mm
7886-41-Z3CT	7886-41-SS	.85	21.59
7886-42-Z3CT	7886-42-SS	.98	24.89

Strikes

7880-C5-Z3CT or 7880-C5-SS

Dim.	inch	mm
A	.20	5.08
B	1.18	29.97
C	.866	22.00
D	.167	4.24
E	1.13	28.70
F	.394	10.01
G	.06	1.52
H	1.72	43.69

7880-C7-Z3CT or 7880-C7-SS

Dim.	inch	mm
A	.06	1.52
B	.54	13.72
C	.167	4.24
D	.866	22.00
E	1.18	29.97
F	.16	4.06

Click here for the Engineering Drawing
7880-C7 Revision B

7880-C9-Z3CT or 7880-C9-SS

Dim.	inch	mm
A	.150	3.81
B	1.18	29.97
C	.866	22.00
D	.167	4.24
E	.590	14.99
F	.27	6.85
G	.06	1.52
H	.38	9.65
I	.230	5.84

Click here for the Engineering Drawing
7880-C9 Revision B

7882-C2-Z3CT or 7882-C2-SS

Dim.	inch	mm
A	.590	14.99
B	.200	5.08
C	.394	10.01
D	.06	1.52
E	1.050	26.67

Click here for the Engineering Drawing
7882-C2 Revision B

Customer Assistance
and Sales

DFCI Solutions, Inc.
5401 S. Kirkman Rd.
Suite 310
Orlando, FL 32819
Phone: 407-926-0231
Fax: 407-926-0232
Email: quotes@dfcis.com

Manufacturing

DFCI Solutions, Inc.
425 Union Boulevard
West Islip, NY 11795
Phone: 631-669-0494
Fax: 631-669-0785

DFCI ® is a registered trademark of DFCI Solutions, Inc. DFCI Solutions, Inc. was founded in 1936 by William Dzus, the inventor of the Quarter-Turn Fastener.

RACEX ® is a registered trademark of DFCI Solutions, Inc.

DZUS ® is a registered trademark of Southco. It's use does not imply any endorsement or certification by Southco, of DFCI products, or any affiliation between Southco and DFCI Solutions, Inc.